|
We use, and recommend,
these top quality items because they are the best ...
We are always searching for
new and exciting products and techniques to improve our
already state of the art custom rifles. Many of these products
do not have what it takes to make it through the front door of
Brown Precision. However, the products that do pass our
stringent testing are offered to you as options on your new
Brown Precision rifle, or an existing one. You can feel
confident with these products because we feel confident
with these products.
Conetrol
Custom Scope Mounts
We have been using
Conetrol scope mounts for years. They are a very clean, strong
mount that enables a scope to be mounted lower then most other
mounts. Conetrol mounts are a non detachable mount.
Dave
Talley Custom Peep Sights
Iron
Sights
Talley
T.N.T. Scope Mounts
 Dave Tally and Gary
Turner from Glenrock Wyoming produce what we think are the
toughest scope mount in the world today. Lets face it, a scope
mount’s job is to hold the scope totally secure in all
conditions. The oversized dovetail design, solid steel
construction, and recoil shoulders in front and rear of the
ring provide 100% security and alignment no matter what. These
mounts are available in a quick release version (standard on
all Pro-Hunter Elite rifles) that enable scope and rings to be
removed and later replaced while maintaining absolute zero.
They are also available in non detachable style that is ideal
for rifles where removing a scope is not necessary. The quick
release version utilizes either levers or standard Torx head
screws to secure the ring to the base.
Barrel
Band Front Swivel
 Classic styling and
functional reliability machined and permanently installed to fit
your barrel contour exactly. Allows your rifle to be
carried lower on the shoulder and keeps your hand away from
stock-mounted front swivels on large bore rifles. Standard
equipment on all Pro-Hunter series rifles.
8
x 40 Magnum Base Screws
 This is another first
for Brown Precision. Years ago we realized that the small 6x48
screws that have been used on scope mounts for decades just
weren’t secure enough to hold the larger heavier scope so
popular today. Not only did they not hold up under recoil, but
would frequently break when a rifle was subjected to unusually
rough treatment. The solution was to open the standard scope
mount to the beefier 8x40 size. These not only provide almost
twice the holding power of the smaller screws, but while
enlarging these screws we are able to make sure the action
mounting holes are aligned perfectly with the action and barrel.
The 8x40 Magnum base screws are highly recommended on any rifle
that may be subjected to rough treatment.
Speedlock
Firing Pin Spring
Replacing the factory
20 to 22 pound firing pin spring with a beefier 28 to 30 pound
spring has a number of advantages. First, the increased lock
time aids in accuracy. The harder hit on the primer insures more
consistent ignition. This helps accuracy, but more importantly
gives better ignition in cold weather. The heavier spring also
helps reduce the risk of a “frozen” firing pin when the
weather really gets nasty. The Speedlock Firing Pin Spring is
standard equipment on the Pro-Hunter and Pro-Hunter Elite
rifles, but is highly recommended on any rifle that will be used
in harsh weather conditions.
|
Important Notice: Specifications,
prices and availability are accurate to the best of our knowledge, but subject to
change without notice. Prices shown are in US dollars and do not include shipping, applicable
sales tax or customer requested options.