Brown Precision, Inc., Manufacturers of Custom and High Performance Rifles.

SELECTING COMPONENTS
with the Brown Precision Difference


Custom built High Country Rifle ($4,100 value) built to your specs.  Click here to enter raffle.
Enter DREAM RIFLE Raffle

to win a $4,600 custom rifle

Brown Precision, Inc.
7786 Molinos Ave.
PO Box 270 W.
Los Molinos, CA 96055
(530) 384-2506
(530) 384-1638  fax
email Brown
 
Precision Rifles
» Brown Custom Rifles
» Custom Rifle Options
» Selecting Components

Precision Stocks
» The Brown Difference
» Pre-Finished Stocks
» Stock Blanks
» Stock Bedding
» Stock Materials

Services Available
» Custom Machine Work
» Custom Metal Finishes

About Brown
» Company "Firsts"
» FAQ's
» Glossary of Terms
» How Mark Brown Builds
   a Rifle for Himself
» Show Dates - Join Us
» Donations & Winners
» Testimonials
» Trophy Room

Dealer Information
» Become a Dealer
» Dealer Login

Company Information
» General Policies
» Privacy Policy
» Lifetime Warranty

Website
» Site Map



Website ©2002-2007 by
Brown Precision Inc.
updated 17 Sep 2008

design & marketing by
Saccomano Associates
 

Selecting Components
» Actions
» Barrels
» Scope Mounts
» Scopes
 

 
Selecting Components for Lightweight Mountain Rifle ...

     If your goal is a lightweight rifle, you must carefully consider the components and then put together the best combination for your needs.
     We've put together the following information to help you make your ultimate decision. If weight isn't really a concern, put the weight where it counts - in the barrel and in the scope. And remember, after a hard day of hunting, ounces feel like pounds.

Actions

Actions recommended by Brown Precision. Click on image for larger view.     Remington is our first choice for several reasons:

  1. These actions are as light as any other
  2. They are easy to work with and very functional
  3. They are available, as are replacement parts, if needed
  4. The triggers are second to none

     The following weights of full actions (bolt, guard screws, trigger guard magazine liner, trigger assembly, recoil lugs, follower and spring) - everything except the barrel, stock, scope and mounts.

Remington 700 short ADL .............
Remington 700 short BDL .............
Remington 700 long ADL ..............
Remington 700 long BDL ..............
Remington 600 .......................
Remington 788 long (.243, .308) .....
Remington 7..........................
Mauser Mark X .......................
Sako medium (current production) ....
Sako long ...........................
Ruger short dovetail receiver .......
Ruger long dovetail receiver ........
Weatherby Model 70 post-64 ..........
Weatherby Mark V ....................
2 lbs. 3 1/2 oz.
2 lbs. 4 oz.
2 lbs. 6 1/2 oz.
2 lbs. 7 oz.
1 lb. 15 oz.
2 lbs. 11 oz.
2 lbs. 2 oz.
2 lbs. 15 oz.
2 lbs. 5 oz.
2 lbs. 13 oz.
2 lbs. 6 oz.
2 lbs. 8 1/2 oz.
2 lbs. 13 oz.
3 lbs. 3 oz

Barrels

     Whether you are ready to build a lightweight rifle from scratch, or just want to knock off a few ounces from your existing rifle, the barrel is a good place to start. The average factory barrel can be turned down and save up to 10 ounces without giving up strength or accuracy. Cutting a barrel back can also save weight without a significant loss of velocity and no loss of accuracy. The average factory barrel weighs 1/2 oz. per inch at the muzzle.
     If the rifle is bedded properly, most factory barrels will shoot efficiently. In custom barrels, we favor stainless over chrome-moly for the simple reason that the bore will never pit. And accuracy life is greatly extended. Also, with stainless, the first shot out of a cold, clean barrel is more likely to go to the proper point of impact than if shot from a chrome-moly barrel.

Average Barrel Contours (for comparison only)






Contour
#1
#3
#5
#10
Rem. factory
Rem. factory mag.
Length
22"
22"
22"
24"
22"
24"
Weight
1 lb. 13 oz
2 lbs. 10 oz.
3 lbs. 3 oz.
5 lbs. 5 oz.
2 lbs. 7 1/4 oz.
2 lbs. 14 oz.
Barrel Diameter @ 20"
.550"
.625"
.700"
1.450"
.580"
.595

Note: Barrels are available in contours from #1 through #10. If you have any questions on barrels, or anything else, give us a call.

Scope Mounts

Scope Mount recommendations from Brown Precision. Click on image for larger view.     As you probably know, there is a wide variety of ring/base combinations on the market from which to choose. Conetrol is all steel, projectionless, affordable and very good looking - our first choice.
     If you're looking for detachable scope mounts, Dave Talley Custom T.N.T.'s are second to none. We suggest staying away from those mounts with the two rear windage screws (Redfield type). 
     The following weights should help you choose between the different brands.

Leupold/Redfield
1 pc. Base 4 oz.
2 pc. Bases 3 oz.
Rings/Med. 3 oz.
Conetrol
1 pc. Base 3 oz.
2 pc. Bases 2 1/2 oz.
Rings/Med. 2 oz.
Talley T.N.T.
Rings & Bases
4 1/2 oz.

Scopes

     Brown Precision is an authorized dealer for Zeiss and Swarovski scopes and binoculars. We can also get Leupold scopes for those who prefer the American made alternative.
     We feel Zeiss makes one of the best scopes on the market, but they're a little heavier than Swarovski and Leupold, our next choices. Generally, fixed powers are lighter than variables. The lower the power, the less the weight.

Zeiss
4X 32 ..... 11.3 oz.
6X 32 ..... 11.3 oz.
3-9 x 36 .. 15.2 oz.
Swarovski
4X ..... 10.8 oz.
6X ..... 11.3 oz.
3x9 ...... 13 oz.
Leupold
4X ......... 9.3 oz.
1.5x5 ...... 9.8 oz.
3x9 ....... 13.6 oz.

     Call us for prices on Zeiss and Swarovski scopes.  (530) 384-2506.


top  ~  home page  ~  glossary  ~  faq's  ~  contact Brown  ~  site map


Important Notice:  Specifications, prices and availability are accurate to the best of our knowledge, but subject to change without notice.  Prices shown are in US dollars and do not include shipping, applicable sales tax or customer requested options.

We welcome you to print any of this information for yourself or friends; just please keep this information in context and tell them where it came from.  For commercial use, please notify us and include appropriate attribution.